BZPKK - SANFORD'S RUBBER CEMENT
- MSDS: BZPKK
- Manufacturer: SANFORD CORP
- Product Name: SANFORD'S RUBBER CEMENT
- National Stock Number: 8040-01-112-4914
Product Identification
Product ID:SANFORD'S RUBBER CEMENT
MSDS Date:02/01/1991
FSC:8040
NIIN:01-112-4914
MSDS Number: BZPKK
Responsible Party
BELLWOOD, IL 60104-1940
US
Emergency Phone: 800-228-5635
Info Phone: 800-228-5635
Cage: 86874
Contractor
Telephone: 1-800-323-0749
Cage: 86874
Ingredients
HEPTANE
CAS: 142-82-5
RTECS: MI7700000
Fraction By Weight: 85-90%
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM
RUBBER
Fraction By Weight: 10-12%
ADDITIVES
Fraction By Weight: 1-4%
ETHYL ALCOHOL (ETHANOL)
CAS: 64-17-5
RTECS: KQ6300000
Fraction By Weight: 0-15%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM; 9596
Hazards
LD50 LC50 Mixture:ORAL LD50 (RATS) >5.0G/KG.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NOT ESTABLISHED BUT INFERRED FROM INFO
SUPPLIED FOR EACH OF THE INGREDIENTS: EYE/SKIN/INGEST:NOT
AVAILABLE. INHAL:DIZZINESS, NAUSEA, HEADACHE.
Effects of Overexposure:DIZZINESS, NAUSEA, HEADACHE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:(BASED ON INFO SUPPLIED FOR VARIOUS INGREDIENTS). EYE:FLUSH
W/WATER.CONTACT PHYSICIAN. SKIN:NOT APPLICABLE. INHAL:REMOVE TO
FRESH AIR.CONSULT PHYSICIAN IF SYMPTOMS PERSIST. INGEST:NOT
APPLICABLE.
Fire Fighting
Flash Point Method:TCC
Flash Point:=-3.9C, 25.F
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:1.2
Upper Limits:7.5
Extinguishing Media:FOAM, CARBON DIOXIDE, OR DRY CHEMICAL.
Fire Fighting Procedures:FOLLOW GUIDELINES FOR CLASS 1/GROUP D
FLAMMABLE LIQUIDS.
Unusual Fire/Explosion Hazard:HEAVIER THAN AIR VAPORS.
Accidental Release
Spill Release Procedures:EXTINGUISH ALL FLAMES, COLLECT IN ABSORBNET
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:APPROVED RESPIRATOR IF TLV IS EXCEEDED.
Ventilation:AS NEEDED.
Protective Gloves:CHEMICALLY RESISTANT NEOPRENE.
Eye Protection:OSHA APPROVED FOR SPLASH PROTECTION.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
BOILING PT/VAP PRESSURE/EVAPORATION RATE DATA ARE FOR HEPTANE.
Chemical Properties
HCC:F2
Boiling Pt:=93.3C, 200.F
Vapor Pres:40 @68F
Vapor Density:>1
Spec Gravity:0.68-0.72
pH:NP
Viscosity:NP
Evaporation Rate & Reference:2.8, BUTYL ACETATE=1
Solubility in Water:NEGLIGIBLE.
Appearance and Odor:CREAM LIQUID, HEPTANE ODOR.
Percent Volatiles by Volume:85-90
Corrosion Rate:NP
Stability
Stability Indicator/Materials to Avoid:YES
AVOID SPARKS & OPEN FLAMES AS WELL AS STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID SPARKS & OPEN FLAMES AS WELL AS
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:SUSPECT CARBON MONOXIDE & ACID
COMBUSTION PRODUCTS.
Disposal
Waste Disposal Methods:TREAT AS FLAMM HAZ WASTE IN COMPLIANCE WITH EPA
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.